seppdroid/DR-DOS-OpenDOS
1
0
Fork 0
mirror of https://github.com/SEPPDROID/DR-DOS-OpenDOS.git synced 2025-10-22 16:04:20 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
1e186fbcbd78d6416445779ba037377cb48825ea
DR-DOS-OpenDOS/IBMDOS/PCMIF.A86
Sepp J Morris 34b50d2a29 Upload
2020-11-04 23:59:28 +01:00

1029 lines
31 KiB
Plaintext
Raw Blame History

; File : $PCMIF.A86$
;
; Description :
;
; Original Author : DIGITAL RESEARCH
;
; Last Edited By : $CALDERA$
;
;-----------------------------------------------------------------------;
; Copyright Work of Caldera, Inc. All Rights Reserved.
;
; THIS WORK IS A COPYRIGHT WORK AND CONTAINS CONFIDENTIAL,
; PROPRIETARY AND TRADE SECRET INFORMATION OF CALDERA, INC.
; ACCESS TO THIS WORK IS RESTRICTED TO (I) CALDERA, INC. EMPLOYEES
; WHO HAVE A NEED TO KNOW TO PERFORM TASKS WITHIN THE SCOPE OF
; THEIR ASSIGNMENTS AND (II) ENTITIES OTHER THAN CALDERA, INC. WHO
; HAVE ACCEPTED THE CALDERA OPENDOS SOURCE LICENSE OR OTHER CALDERA LICENSE
; AGREEMENTS. EXCEPT UNDER THE EXPRESS TERMS OF THE CALDERA LICENSE
; AGREEMENT NO PART OF THIS WORK MAY BE USED, PRACTICED, PERFORMED,
; COPIED, DISTRIBUTED, REVISED, MODIFIED, TRANSLATED, ABRIDGED,
; CONDENSED, EXPANDED, COLLECTED, COMPILED, LINKED, RECAST,
; TRANSFORMED OR ADAPTED WITHOUT THE PRIOR WRITTEN CONSENT OF
; CALDERA, INC. ANY USE OR EXPLOITATION OF THIS WORK WITHOUT
; AUTHORIZATION COULD SUBJECT THE PERPETRATOR TO CRIMINAL AND
; CIVIL LIABILITY.
;-----------------------------------------------------------------------;
;
; *** Current Edit History ***
; *** End of Current Edit History ***
;
; $Log: $
; PCMIF.A86 1.21 93/09/09 22:36:50
; Int 21/59 uses error stack
; PCMIF.A86 1.20 93/08/27 18:56:30
; Int 25/26 32 bit sector detection
; PCMIF.A86 1.19 93/07/22 19:30:54
; chnage int 25/26 support for NDD
; PCMIF.A86 1.18 93/07/20 22:47:54
; Even fewer checks on int 25/26
; PCMIF.A86 1.14 93/05/06 19:28:31
; Move int 23/28 support to CIO.
; PCMIF.A86 1.13 93/05/05 23:31:0
; int 2A/84 is now only generated on input-and-wait functions
; PCMIF.A86 1.12 93/03/25 15:06:48
; tweak int21 entry
; ENDLOG
;
; 24 Aug 87 The CARRY flag is now preserved for all DOS functions below
; 038h Get/Set Country Code.
; 04 Sep 87 Display the Interrupt Number and Registers when an illegal
; software interrupt is executed by an application. This
; is disabled by DBG OFF.
; 09 Sep 87 DDIO interface changed to support a Double Word sector
; number.
; 05 Oct 87 Critical Error abort routine now uses the correct
; terminate code.
; 14 Oct 87 INT2F responds like a Network Redirector
; 28 Oct 87 Preserve the state of the INDOS_INTERNAL flag during multiple
; calls through DOS_ENTRY
; 29 Oct 87 DS now points at the IBM PC ROS during an INT1B and INT1B
; moved into IBMROS.
; 7 Nov 87 Removal of development flags
; 5 Jan 88 Terminate CP/M applications making DOS Calls in Concurrent DOS
; 26 Feb 88 Terminate DOS applications making CP/M calls in DOSPLUS
; 26 Apr 88 INT25/26 error codes only translated for Concurrent
; 18 May 88 Prevent corruption of the EXIT_CODE by INT23 and INT24
; when the application does not return.
; 23 May 88 Prevent termination during CONFIG.SYS processing in DOSPLUS
; 26 May 88 Force INDOS and ERROR flags to ZERO on terminate
; 1 Jun 88 Modify INT28 to execute delays and work with SideKick.
; 15 Jul 88 Support the IDLECNT field in the Process Descriptor and
; CCB BUSY bit.
; 07 Sep 88 PolyTron PolyWindows make DOS functions calls whenever
; CS < SS. Therefore during the INT21 Entry and Exit code
; interrupts must be disabled untill the stack swap occurs
; even though the INDOS_FLAG is non-zero.
; 24 Oct 88 File Lock/Unlock is now treated as an INACTIVE function.
; 4 Nov 88 Correct the INT25/26 Error Translation Code
; 21 Nov 88 Make INt25/26 Error Translation even better.
; 29 Nov 88 Command Line Editor Insert on by default.
; 21 Dec 88 IJs IDLE detection improvement only DELAY if someone else is
; ready to run.
; 11 Jan 89 Inc/Dec INTERNAL_FLAG to support DOS_ENTRY reentrancy.
; 30 Jan 89 Inc/Dec INDOS_FLAG to INT25/26 Direct Disk I/O (CHKDSK/PRINT)
; 19 Feb 89 Check the SHARE_FLAG for SHARING status in DR DOS
; 9 Mar 89 Save/Restore PSP_USERSP/SS round int28's (SKPLUS/LINK/CTRL-C)
; 18 Apr 89 ij Maintain the INDOS_FLAG correctly while processing INT 24
; 18 Apr 89 Only take over INTs 5B and 5C for Debug Systems
; 22 May 89 Setup DS before testing the state of the Share Flag.
; 25 May 89 Support INT28_FLAG for functions 01 to 0C inclusive
; 31 May 89 Move break_sp into DOS internal data area
; 1 Jun 89 Save PSP_USERSS and SP during a critival Error (INT 24)
; 05 Jun 89 Return NOT present for ASSIGN command and TRUE state for APPEND
; 29 Jun 89 Save/restore retry_sp & retry_off around INT 24
; 10 Jul 89 INT27 corrected to handle memory size of XXX1 (INFORM)
; 31 Jul 89 Move stacks to DATA.PCM (CDROM support under way...)
; 11 Aug 89 Create INT2F.PCM to support real INT 2F functions
; 6 Sep 89 INT2A/84 keyboard busy loop added to do_int28
; 23 Oct 89 MON_PERM removed from func5D/func5E/func5F (pain with MSNET..)
; 9 Nov 89 Int 5B & 5C no longer taken over in DRDOS Debug versions
; (Conflicts with PC-Net)
; 15 Jan 90 pcmode_swapin/pcmode_swapout added for paged isr support
; 25/Jan/90 Support Idle Data Area
; 25/Jan/90 Add forth stack to support Japanese FEP and PTHOT.
; 29/Jan/90 keep int21 CS/IP/FLAGS on local stack
; 13/Feb/90 Added func63.
; 20/Feb/90 CDOS checks caller is DOS process and aborts if not.
; 22/Feb/90 Int25/26 checks disk label for passwords
; Also swaps to normal stack like others DOS's
; 7 Mar 90 Convert to register preserved function calls
; 16 Mar 90 Int25/26 checks out for Leopard Beta 2
; 4 Jun 90 Int21/25&35 don't swap stacks-ANSI.SYS Framework DOS window bug
; 7 Jun 90 Print Rite fix moves to init.pcm
; 29 Jun 90 CDOS idle detection uses timer info
; 9 Aug 90 Int 8 tick count packed in P_CMOD
; 19 Sep 90 load current_psp before checking PSP_PIDF (thanks Datapac)
; 4 Oct 90 improved control break handling
; 11 Oct 90 dev_map now supported to set LPTn/COMn mapping
; 1 Nov 90 default Int 24 handler returns "Fail"
; 19 feb 91 do_int28 calls read_time_and_date (BIOS CLOCK needs a call
; every day)
; 14 jun 91 copy user regs to local copy after int24 for pcshell
; 8 aug 91 SI preserved on Int25/26 for SCAN 7.7
include pcmode.equ
include fdos.def
include vectors.def
include i:msdos.equ
include i:mserror.equ
include i:psp.def
include i:fdos.equ
PCM_CODE CSEG BYTE
extrn pcmode_dseg:word
extrn break_check:near ; Control-C Check
extrn error_exit:near
extrn fdos_nocrit:near
extrn get_ddsc:near
eject
;
; This entry point is used when a CALLF PSP:0005 has been executed
; Here the function number is passed in CL and not AH and only
; functions 0 to 24 inclusive can be executed.
;
; Entry Stack -> INT 21 Stack
;
; SP + 04 Return Offset Current Flags
; SP + 02 PSP Segment PSP Segment
; SP + 00 000Ah Return Offset
;
Public call5_entry
call5_entry:
pop ax ; Remove 000Ah return Offset
pushf ; Save the Flags
push bp ! mov bp,sp ; Get Stack Frame Pointer
mov ax,02[bp] ; Get the FLAGS
xchg ax,06[bp] ; Swap with the return offset
mov 02[bp],ax ; and then save the return offset
pop bp ; Restore the BP register
mov ah,cl ; Make it look like an INT 21
cmp ah,024h ; Check for a valid function for this
jbe int21_entry ; entry technique if not return
illegal_iret:
mov al,0
iret
int21_e01:
mov ds,word ptr .INT31_SEGMENT
jmps int21_e02
eject
; ++++++++++++++++++++++++++
; Int 20 - Program Terminate
; ++++++++++++++++++++++++++
;
Public int20_entry
int20_entry:
mov ah,00h
; jmps int21_entry ; and jump to the standard entry point
eject
; +++++++++++++++++++++++++
; Int 21 - Function Request
; +++++++++++++++++++++++++
;
Public int21_entry
int21_entry:
cmp ah,pcmode_ftl ; is it in range ?
ja illegal_iret ; no, return BEFORE enabling ints
cld ; Clear the direction flag
PUSH$DOS ; Save User Registers
mov ds,pcmode_dseg ; get CS relative Data Segment
test pcmode_dseg,0FFFFh ; if Data Segment is zero then get
jz int21_e01 ; the Data segment address from
int21_e02: ; the segment portion of INT 31
;
; The following routines execute on the users stack without
; modifing the INDOS_FLAG etc. These routines should only read
; or update BASIC system variables.
;
cmp ah,33h ; Func 33h - Control Break
je int21_e10
cmp ah,50h ; Func 50h - Set PSP
jb int21_e20
cmp ah,51h ; Func 51h - Get PSP
jbe int21_e10
cmp ah,62h ; Func 62h - Get PSP
jne int21_e20
int21_e10:
mov bp,sp ; Calculate the Stack Frame address
call internal_func ; "jump" to appropriate routine
jmp int21_exit
int21_e20:
inc indos_flag ; Increment the INDOS Flag
mov int21AX,ax ; save function number
if DOS5
cmp WindowsHandleCheck,26h ; is windows active ?
jne int21_e30
mov ax,LocalMachineID ; get local machine ID (zero unless
mov machine_id,ax ; we are multi-tasking)
else
callf win386_local_machine
cmp machine_id,0 ; did it nobble the machine ID
jnz int21_e30 ; if so leave it alone
mov ax,LocalMachineID ; get local machine ID (zero unless
mov machine_id,ax ; we are multi-tasking)
endif
int21_e30:
mov ax,current_psp
mov owning_psp,ax
mov es,ax ; Get the PSP
mov ax,sp
mov PSP_USERSP,ax ; Save the SS:SP pointer to
mov PSP_USERSS,ss ; the register image ready for any
; Critical errors that might occur
xchg ax,int21regs_off ; point to callers registers
mov prev_int21regs_off,ax ; while saving current
mov ax,ss ; pointer to cater for
xchg ax,int21regs_seg ; re-entrancy
mov prev_int21regs_seg,ax
xor ax,ax
mov remote_call,ax ; indicate we are a local call
mov int28_flag,al ; Do NOT Generate INT 28s
mov ax,ds
mov ss,ax ; swap initially to the error
mov sp,offset error_stack ; stack until we know better
mov ax,int21AX ; reload AX
sti
cmp ah,59h ; Func 59h - Return Extended Error
je int21_e50 ; use the error stack
cmp ah,0Ch ; are we a character function
ja int21_e40 ; in range 01-0C ?
cmp ah,00h
je int21_e40
cmp error_flag,0 ; Use the "ERROR" Stack for the above
jnz int21_e50 ; functions 01-0C if error_flag set
mov sp,offset indos_stack ; else use the "INDOS" stack for these
mov int28_flag,TRUE ; functions and generate INT 28s
jmps int21_e50
int21_e40:
mov error_flag,0 ; clear the error flag in case someone
; hasn't returned from an Int 24
push ax ; save function on stack
mov ah,82h ; magic number in AH
int 2ah ; call server hook
pop ax ; recover function number
mov sp,offset normal_stack ; switch to the NORMAL stack
test break_flag,0FFh ; is the Break Flag ON
jz int21_e50 ; NO - So continue
call break_check ; Handle the Control-C
int21_e50:
if IDLE_DETECT
test idle_flags,IDLE_DISABLE ; don't break the pipeline unless
jz int21_idle ; IDLE checking enabled
int21_e60:
endif
call int21_func ; Execute the function
cli ; Stop anybody interfering
les bp,int21regs_ptr ; point to user stack
mov es:reg_AL[bp],al ; always return AL
mov ax,prev_int21regs_off
mov int21regs_off,ax
mov ax,prev_int21regs_seg
mov int21regs_seg,ax
mov ax,es
mov ss,ax ; back to users stack
mov sp,bp
dec indos_flag ; Decrement the INDOS_FLAG
; jmp int21_exit
Public int21_exit
int21_exit:
POP$DOS ; Restore Registers
iret
eject
if IDLE_DETECT
; Only called if Idle detection is enabled
; AH,DL as on Int 21 Entry
; Decide if function is active/inactive
int21_idle:
;----------
if IDLE_DETECT
mov bx,int28_reload ; reset the INT28 delay counter
mov int28_delay,bx ; with the Reload value
endif
cmp ah,5Ch ! je int21_inactive ; Treat Lock/Unlock as inactive some
; applications poll locked record.
cmp ah,44h ! je int21_inactive ; IO Control Treated as Inactive
cmp ah,2Ch ! ja int21_active ; > Get Current Time all active
je int21_inactive ; Get Current Time inactive
cmp ah,2Ah ! je int21_inactive ; Get Current Date inactive
cmp ah,0Bh ! je int21_inactive ; Console Status
cmp ah,0Ch ! je int21_inactive ; Flush and Invoke Treated as Inactive
cmp ah,19h ! je int21_inactive ; Get Current Disk
cmp ah,06h ! jne int21_active ; Treat RAW_IO Status as Inactive
cmp dl,0FFh ! je int21_inactive ;
int21_active: ; Active function Executed
or idle_flags,IDLE_DOSFUNC ; set DOSFUNC flag for BIOS
call active ; remember we were active
jmps int21_e60 ; continue execution
int21_inactive:
call inactive ; Process this INACTIVE function
jmps int21_e60
Public inactive
inactive:
push es ! push ax
dec active_cnt ; Decrement the count
jnz inactive_10 ; Return if Non-Zero
mov ax,idle_max ; Get the default count value
mov active_cnt,ax ; and reset the internal count
test idle_flags,IDLE_DISABLE ; Has Idle Checking been enabled
jnz inactive_10 ; Skip if NO.
mov ax,PROC_IDLE ; Process is IDLE
callf idle_vec ; Call the IDLE Handler
inactive_10:
pop ax ! pop es
ret
;
; This routine will reset the active count for functions which
; are treated as INACTIVE but which have active sub-functions.
;
Public active
active:
push ax
mov ax,idle_max ; Get the default count value
mov active_cnt,ax ; and reset the internal count
pop ax
ret
endif
;
;
; This function is invoked for functions number above the last
; supported function number. It forces AL to zero and returns.
; Just that and nothing more.
;
ms_zero_AL:
xor ax,ax ; AL = 0 for return
ret
eject
; DOS_ENTRY is used to call DOS functions internally.
; eg. Func4B (exec) calls MS_X_OPEN, MS_X_READ, MS_X_CLOSE etc.
; It is the responsibilty of the caller to make sure that no side
; effects exist if this entry point is used.
; eg. critical error handling
;
;
Public dos_entry
dos_entry:
clc
cld
pushf ; look like Int21 registers
pushf ! pushf ; fake CS/IP positions
push ds ! push es ; Save registers on the USER stack
push bp ; no Stack Swap is executed and DS
push di ! push si ; and ES are swapped.
push dx ! push cx
push bx ! push ax
mov bp,sp ; Initialise Stack Frame
call get_dseg ; Get our Data Area
inc internal_flag
push fdos_data+0*WORD ; save fdos pblk so we can
push fdos_data+1*WORD ; be re-entrant(ish)
push fdos_data+2*WORD
push fdos_data+3*WORD
push fdos_data+4*WORD
push fdos_data+5*WORD
push fdos_data+6*WORD
push int21regs_off
push int21regs_seg
mov int21regs_off,bp
mov int21regs_seg,ss
call internal_func ; Execute the function
mov reg_AL[bp],al ; always return AL to caller
pop int21regs_seg
pop int21regs_off ; restore previous pointer user REGS
pop fdos_data+6*WORD
pop fdos_data+5*WORD
pop fdos_data+4*WORD
pop fdos_data+3*WORD
pop fdos_data+2*WORD
pop fdos_data+1*WORD
pop fdos_data+0*WORD ; restore fdos_pb for nested calls
dec internal_flag
pop ax ! pop bx ; Update the registers then
pop cx ! pop dx ; set the flags and return
pop si ! pop di ; to the user
pop bp
pop es ! pop ds
popf ; discard dos_IP
popf ; and dos_CS
popf ; get result
jnc dos_entry10
neg ax ; return using our negative error
stc ; conventions
dos_entry10:
ret
Public int21_func
int21_func:
;----------
; On Entry:
; AX, CX, DX, SI, DI as per Int 21
; BX = ??
; BP = ??
; DS = pcmode data
; ES = ??
; On Exit:
; (to client function)
; All general purpose registers as per Int 21 entry
; ES = dos_DS
;
xor bx,bx ; BH = 0
mov bl,ah ; BX = function number
shl bx,1 ; make it a word offset
push pcmode_ft[bx] ; save address of Function
les bp,int21regs_ptr
mov bx,es:reg_BX[bp] ; reload from dos_BX,dos_BP,and dos_DS
les bp,es:dword ptr reg_BP[bp]
ret
internal_func:
;-------------
; On Entry:
; All registers as per Int 21 EXCEPT
; DS = pcmode data
; BP = dos_REGS stack frame
; On Exit:
; (to client function)
; ES = dos_DS
;
mov al,ah ; function number in AL
cbw ; AH = 0
xchg ax,bx ; get subfunction in BX
shl bx,1 ; make offset in the internal table
push pcmode_ft[bx] ; save address of Function
xchg ax,bx ; restore BX
mov ax,reg_AX[bp] ; recover function number
mov es,reg_DS[bp] ; ES = callers DS
ret ; "jump" to handler
eject
; INT25 and INT26 direct disk I/O interface
;
;Standard DOS 1.xx - 3.30 INT25/26 Interface
;===========================================
;
; entry: al = drive number
; ds = DMA segment
; bx = DMA offset
; cx = number of sectors
; dx = beginning relative sector
;
;
;Enhanced DOS 3.31 INT25/26 Interface
;====================================
;
; If CX == 0FFFFh then the application is using the enhanced
; INT25/INT26 interface which allows access to more than 64K
; sectors.
;
; entry: al = drive number
; bx = Parameter block Offset
; ds = Parameter block Segment
;
; Parameter Block Format
;DS:BX -> DD Starting Sector No.
; DW Number of Sectors
; DD Transfer Address
;
;
; exit: C flag = 0 if successful
; = 1 if unsuccessful
; ax = error code(if CF = 1)
; ah physical error
; al logical error
; Users orginal flags left on stack
;
;
eject
DDIO_INT13 equ 0
DDIO_READ_OP equ 1
DDIO_WRITE_OP equ 2
; ++++++++++++++++++++++++++++
; Int 26 - Absolute Disk Write
; ++++++++++++++++++++++++++++
;
Public int26_entry
int26_entry:
mov ah,DDIO_WRITE_OP ; This is a WRITE operation
jmps int26_10
; +++++++++++++++++++++++++++
; Int 25 - Absolute Disk Read
; +++++++++++++++++++++++++++
;
Public int25_entry
int25_entry:
mov ah,DDIO_READ_OP ; This is a READ operation
int26_10: ; Common Direct Disk I/O code
cld
push ds ! push es
push dx ; save DX for FLASHCARD
push ds ! pop es ; ES = callers DS
call get_dseg ; Get PCMODE Data Segment
inc indos_flag ; Update the INDOS_FLAG
mov normal_stack+2,ss ; save users SS:SP
mov normal_stack,sp
cli
push ds ! pop ss ; use normal stack when in here
mov sp,offset normal_stack
sti
inc cx ; CX = FFFF indicates this is
jz int26_30
; CHECK FOR PARITIONS > 32 MBytes...
dec cx ; CX restored
push es
push ax
push bx
push dx
call get_ddsc ; ES:BX -> DDSC_
mov di,0201h ; assume bad drive
jc int26_20
mov di,0207h ; assume large media, and this error
if 0
; This code works out the total number of sectors on a drive
mov ax,es:DDSC_NCLSTRS[bx] ; get last cluster #
dec ax ; make it # data clusters
xor dx,dx
mov dl,es:DDSC_CLMSK[bx] ; get sec/cluster -1
inc dx ; DX = sec/cluster
mul dx ; DX:AX = # data sectors
add ax,es:DDSC_DATADDR[bx] ; add in address of 1st data sector
adc dx,0
else
mov ax,es:DDSC_NCLSTRS[bx] ; get last cluster #
xor dx,dx
mov dl,es:DDSC_CLMSK[bx] ; get sec/cluster -1
inc dx ; DX = sec/cluster
mul dx ; DX:AX is vaguely the # sectors
test dx,dx ; close enough for bill
endif
stc ; assume an error
jnz int26_20
xor di,di ; DI = zero, no error
int26_20:
pop dx
pop bx
pop ax
pop es
jnc int26_40
xchg ax,di ; AX = error code
jmps int26_60 ; return it
int26_30:
mov dx,es:word ptr 0[bx] ; Get Starting Sector Low
mov di,es:word ptr 2[bx] ; Get Starting Sector High
mov cx,es:word ptr 4[bx] ; Get No. of sectors to transfer
les bx,es:dword ptr 6[bx] ; Tranfer Address Offset
int26_40:
mov FD_DDIO_DRV_OP,ax ; save drive and operation
mov FD_DDIO_NSECTORS,cx ; No. of Sectors
mov FD_DDIO_STARTLOW,dx ; Starting Sector No.
mov FD_DDIO_STARTHIGH,di ; High Word of Sector Number
mov FD_DDIO_DMAOFF,bx ; DMA Offset
mov FD_DDIO_DMASEG,es ; DMA Segment
mov FD_FUNC,FD_DDIO
call fdos_nocrit ; let the FDOS do the work
neg ax ; AX is DOS extended error
jz int26_exit
sub al,-ED_PROTECT ; get AL to Int24 error format
cmp al,-(ED_GENFAIL-ED_PROTECT)
jbe int26_50
mov al,-(ED_GENFAIL-ED_PROTECT)
int26_50: ; no, make it general failure
mov ah,al ; save error in AH
mov bx,offset int13_error
xlat int13_error ; convert error to int13 format
xchg al,ah ; get errors in correct registers
int26_60:
stc ; Set the Carry Flag when an error
int26_exit: ; Occurs and return to the calling app.
cli
mov ss,normal_stack+2 ; back to user stack
mov sp,normal_stack
sti
dec indos_flag ; Update the INDOS_FLAG
sti
pop dx
pop es ! pop ds ; restore callers registers
retf ; leave flags on stack
int13_error db 03h,02h,80h,01h,10h,02h,40h,02h,04h,02h,02h,02h,02h
eject
; ++++++++++++++++++++++++++++++++++++
; Int 27 - Terminate but Stay Resident
; ++++++++++++++++++++++++++++++++++++
;
Public int27_entry
int27_entry:
mov ax,3100h ; Convert this to a DOS 'Terminate and
add dx,15 ; Stay Resident' function by converting the
rcr dx,1 ; memory size in bytes to paragraphs.
shr dx,1 ; On entry DX == memsize + 1 bytes therefore
shr dx,1 ; round upto a paragraph boundary by adding
shr dx,1 ; 15 then divide by 16
jmp int21_entry
eject
;
; DO_INT24:
; On Entry:-
; AH Set for INT 24
; AL Drive Number (0 = A:)
; DI Error Code
; ES:SI Device Header Control Block
;
; On Exit:-
; AL Error Response Retry/Ignore/Fail
;
; INT 24 Critical Error:-
; On Entry:- AH/7 0 = Disk Device
; AH/5 0 = IGNORE is an Invalid Response
; AH/4 0 = RETRY in an Invalid Response
; AH/3 0 = FAIL is an Invalid Response
; AH/2-1 00= DOS Area
; 01= File Allocation Table
; 10= Directory
; 11= Data
; AH/0 0 = Read, 1 = Write
;
; AL 1 Retry the Operation
; BP:SI Device Header Control Block
; DI High Byte Undefined, Low Byte Error Code
;
; On Exit:- AL 0 = IGNORE Error
; 1 = RETRY the Operation
; 2 = TERMINATE using INT 23
; 3 = FAIL the current DOS function
;
Public do_int24
do_int24:
cmp error_flag,0 ; Skip the critical error routine
jz di24_05 ; if the handler is active
mov al,ERR_FAIL ; Then return the FAIL condition
ret ; to the calling routine
di24_05:
push ax ! push bp ; Save our Base Pointer and then the
cli ; Disable Interupts
mov bp,es ; BP:SI points to dev header
mov es,current_psp ; Get the current PSP and USER Stack
push PSP_USERSS ; Save the Users Real SS and SP
push PSP_USERSP ; on the internal Stack
push retry_sp ; also the retry info
push retry_off
push remote_call
push machine_id
mov critical_sp,sp ; Internal Stack Pointer Offset
inc error_flag ; Entering Critical Error Handler
dec indos_flag ; I may be gone some time....
; (an application error handler need
; never return so tidy up first)
mov ss,PSP_USERSS ; Switch to the Users Stack
mov sp,PSP_USERSP
int 24h ; Call the Critical Error Handler
cld
cli ; paranioa.....
call get_dseg ; Reload DS just in case someone at
; A-T or Lotus cannot read
push ds ! pop ss ; Swap back to the Internal stack
mov sp,critical_sp ; and process the returned info.
pop machine_id
pop remote_call
pop retry_off ; restore retry info
pop retry_sp
mov es,current_psp ; Restore the Users original SS and
pop PSP_USERSP ; SP registers from the Stack
pop PSP_USERSS
pop bp ! pop bx ; Restore BP and original AX
sti
mov error_flag,0
inc indos_flag
cmp al,ERR_IGNORE ! jnz di24_10 ; Check for IGNORE and force
test bh,OK_IGNORE ! jnz di24_10 ; to become a FAIL if its an
mov al,ERR_FAIL ; invalid response.
di24_10:
cmp al,ERR_RETRY ! jnz di24_20 ; Check for RETRY and force
test bh,OK_RETRY ! jnz di24_20 ; to become a FAIL if its an
mov al,ERR_FAIL ; invalid response.
di24_20:
cmp al,ERR_FAIL ! jnz di24_30 ; Check for FAIL and force
test bh,OK_FAIL ! jnz di24_30 ; to become a ABORT if its an
mov al,ERR_ABORT ; invalid response.
di24_30:
cmp al,ERR_ABORT ; Do not return if the ABORT option
jz di24_abort ; has been selected but execute
; INT 23 directly
cmp al,ERR_FAIL ; All invalid reponses are converted
ja di24_abort ; to ABORT
di24_40:
ret
di24_abort: ; Abort this Process
mov ax,current_psp ; check not root application because
mov es,ax ; it must not be terminated so force
cmp ax,PSP_PARENT ; Is this the root Process
mov al,ERR_FAIL ; convert the error to FAIL
je di24_40 ; if not we terminate
mov exit_type,TERM_ERROR ; Set the correct exit Type
mov ax,04C00h ; and return code.
mov int21AX,ax
jmp func4C ; Then terminate
eject
;
; Get the PCMODE Emulator data Segment from the PD
;
Public get_dseg
get_dseg:
mov ds,pcmode_dseg ; get CS relative Data Segment
test pcmode_dseg,0FFFFh ; If Data Segment is zero then get
jz get_d10 ; the Data segment address from
ret ; the segment portion of INT 31
get_d10:
mov ds,word ptr .INT31_SEGMENT
ret
;
;INVALID_FUNCTION is called when any unsupported function has been executed
;
Public invalid_function
invalid_function:
mov ax,ED_FUNCTION ; Mark as Invalid Function
jmp error_exit ; and Exit
eject
Public reload_registers
reload_registers:
;----------------
; This routine is called to reload the registers we expect to have correct
; at the start of a PCMODE function.
push ds
lds bp,int21regs_ptr
mov ax,ds:reg_AX[bp]
mov bx,ds:reg_BX[bp]
mov cx,ds:reg_CX[bp]
mov dx,ds:reg_DX[bp]
mov si,ds:reg_SI[bp]
mov di,ds:reg_DI[bp]
les bp,ds:dword ptr reg_BP[bp]
pop ds
ret
PCMODE_DATA DSEG WORD
extrn retry_sp:word
extrn retry_off:word
extrn break_flag:byte
extrn current_psp:word
extrn current_dsk:byte
extrn dma_offset:word
extrn dma_segment:word
extrn error_flag:byte
extrn error_stack:word
extrn exit_type:byte
extrn int21regs_ptr:dword
extrn int21regs_off:word
extrn int21regs_seg:word
extrn prev_int21regs_ptr:dword
extrn prev_int21regs_off:word
extrn prev_int21regs_seg:word
extrn indos_flag:byte
extrn indos_stack:word
extrn LocalMachineID:word
extrn machine_id:word
extrn int21AX:word
extrn normal_stack:word
extrn owning_psp:word
extrn remote_call:word
if DOS5
extrn WindowsHandleCheck:byte
else
extrn win386_local_machine:dword
endif
if IDLE_DETECT
extrn active_cnt:word
extrn idle_max:word
extrn idle_flags:word
extrn idle_vec:dword
extrn int28_delay:word
extrn int28_reload:word
endif
extrn critical_sp:word
extrn internal_flag:byte
extrn int28_flag:byte
PCM_CODE CSEG BYTE
;
; The following Function tables are forced onto a word boundary
; because of the word alignment of the PCMODE_RODATE segment.
; Only word based Read Only data is held in this segment.
;
extrn func00:near, func01:near, func02:near, func03:near
extrn func04:near, func05:near, func06:near, func07:near
extrn func08:near, func09:near, func0A:near, func0B:near
extrn func0C:near, func0D:near, func0E:near, func0F:near
extrn func10:near, func11:near, func12:near, func13:near
extrn func14:near, func15:near, func16:near, func17:near
extrn func19:near, func1A:near, func1B:near, func1C:near
extrn func1F:near, func21:near, func22:near, func23:near
extrn func24:near, func25:near, func26:near, func27:near
extrn func28:near, func29:near, func2A:near, func2B:near
extrn func2C:near, func2D:near, func2E:near, func2F:near
extrn func30:near, func31:near, func32:near, func33:near
extrn func34:near, func35:near, func36:near, func37:near
extrn func38:near, func39:near, func3A:near, func3B:near
extrn func3C:near, func3D:near, func3E:near, func3F:near
extrn func40:near, func41:near, func42:near, func43:near
extrn func44:near, func45:near, func46:near, func47:near
extrn func48:near, func49:near, func4A:near, func4B:near
extrn func4C:near, func4D:near, func4E:near, func4F:near
extrn func50:near, func51:near, func52:near, func53:near
extrn func54:near, func55:near, func56:near, func57:near
extrn func58:near, func59:near, func5A:near, func5B:near
extrn func5C:near, func5D:near, func5E:near, func5F:near
extrn func60:near, func62:near, func63:near, func65:near
extrn func66:near, func67:near, func68:near, func69:near
extrn func6C:near
PCM_RODATA CSEG WORD
Public pcmode_ft, pcmode_ftl
pcmode_ft rw 0
dw func00 ; (00) Terminate Program
dw func01 ; (01) Read Keyboard and Echo
dw func02 ; (02) Display Character
dw func03 ; (03) Auxilary Input
dw func04 ; (04) Auxilary Output
dw func05 ; (05) Print Character
dw func06 ; (06) Direct Console I/O
dw func07 ; (07) Direct Console Input
dw func08 ; (08) Read Keyboard
dw func09 ; (09) Display String
dw func0A ; (0A) Buffered Keyboard Input
dw func0B ; (0B) Check Keyboard Status
dw func0C ; (0C) Flush Buffer, Read Keyboard
dw func0D ; (0D) Reset Disk
dw func0E ; (0E) Select Disk
dw func0F ; (0F) Open File
dw func10 ; (10) Close File
dw func11 ; (11) Search for First
dw func12 ; (12) Search for Next
dw func13 ; (13) Delete File
dw func14 ; (14) Sequential Read
dw func15 ; (15) Sequential Write
dw func16 ; (16) Create File
dw func17 ; (17) Rename File
dw ms_zero_AL ; (18) Unused DOS function (AL = 0)
dw func19 ; (19) Current Disk
dw func1A ; (1A) Set Disk Transfer Address
dw func1B ; (1B) *Get Default Drive Data
dw func1C ; (1C) *Get Drive Data
dw ms_zero_AL ; (1D) Unused DOS function (AL = 0)
dw ms_zero_AL ; (1E) Unused DOS function (AL = 0)
dw func1F ; (1F) Get Default DPB
dw ms_zero_AL ; (20) Unused DOS function (AL = 0)
dw func21 ; (21) Random Read
dw func22 ; (22) Random Write
dw func23 ; (23) File Size
dw func24 ; (24) Set Relative Record
dw func25 ; (25) Set Interrupt Vector
dw func26 ; (26) Duplicate PSP
dw func27 ; (27) Random Block Read
dw func28 ; (28) Random Block Write
dw func29 ; (29) Parse File Name
dw func2A ; (2A) Get Date
dw func2B ; (2B) Set Date
dw func2C ; (2C) Get Time
dw func2D ; (2D) Set Time
dw func2E ; (2E) Set/Reset Verify Flag
dw func2F ; (2F) Get Disk Transfer Address
dw func30 ; (30) Get Version Number
dw func31 ; (31) Keep Process
dw func32 ; (32) Get DPB
dw func33 ; (33) CONTROL-C Check
dw func34 ; (34) Get the Indos Flag
dw func35 ; (35) Get Interrupt Vector
dw func36 ; (36) Get Disk Free Space
dw func37 ; (37) Get/Set Switch Character
dw func38 ; (38) Return Country Dependant Info
dw func39 ; (39) Create Sub-directory
dw func3A ; (3A) Remove Sub-directory
dw func3B ; (3B) Change Sub-directory
dw func3C ; (3C) Create a File
dw func3D ; (3D) Open a File Handle
dw func3E ; (3E) Close a File Handle
dw func3F ; (3F) Read from a File/Device
dw func40 ; (40) Write to a File/Device
dw func41 ; (41) Delete a Directory Entry
dw func42 ; (42) Move a File Pointer
dw func43 ; (43) Change Attributes
dw func44 ; (44) I/O Control
dw func45 ; (45) Duplicate File Handle
dw func46 ; (46) Force a Duplicate File Handle
dw func47 ; (47) Return Text of Current Directory
dw func48 ; (48) Allocate Memory
dw func49 ; (49) Free Allocated Memory
dw func4A ; (4A) Modify Allocated Memory
dw func4B ; (4B) Load and Execute Program
dw func4C ; (4C) Terminate a Process
dw func4D ; (4D) Get Return Code
dw func4E ; (4E) Find Matching File
dw func4F ; (4F) Find Next Matching File
dw func50 ; (50) Set Current PSP
dw func51 ; (51) Get Current PSP
dw func52 ; (52) *Get In Vars
dw func53 ; (53) *Build DPB from BPB
dw func54 ; (54) Return Verify State
dw func55 ; (55) Create a New PSP
dw func56 ; (56) Move a Directory Entry
dw func57 ; (57) Get/Set File Date and Time
dw func58 ; (58) Memory Allocation Strategy
dw func59 ; (59) Get Extended Error
dw func5A ; (5A) Create Temporary File
dw func5B ; (5B) Create New File
dw func5C ; (5C) File Lock Control
dw func5D ; (5D) Internal DOS Function
dw func5E ; (5E) Control Local Machine Data
dw func5F ; (5F) Get Network Assignments
dw func60 ; (60) Perform Name Processing
dw ms_zero_AL ; (61) ?? Parse Path (AL = 0)
dw func62 ; (62) Get Current PSP
dw func63 ; (63) Get Lead Byte Table
dw invalid_function ; (64) *Saves AL and Returns
dw func65 ; (65) Get Extended Country Information
dw func66 ; (66) Get/Set Global Code Page
dw func67 ; (67) Set Handle Count
dw func68 ; (68) Commit File
dw func69 ; (69) Get Serial number
dw func68 ; (6A) Commit File (again)
dw invalid_function ; (6B) Unknown DOS 4
dw func6C ; (6C) Extended Open/Create
pcmode_ftl equ (offset $ - offset pcmode_ft)/2
;**************************
;* Do Not Move This Entry *
;**************************
dw ms_zero_AL ; Illegal Function Handler
end
Reference in New Issue View Git Blame Copy Permalink