Upload

Digital Research
2025-10-25 01:14:21 +00:00 · 2020-11-06 18:50:37 +01:00
parent 621ed8ccaf
commit 31738079c4
8481 changed files with 1888323 additions and 0 deletions
--- a/2.2/PATCHES/CPM22APN.01
+++ b/2.2/PATCHES/CPM22APN.01
@@ -0,0 +1,117 @@
+                                    CP/M   V2.2
+                             Application Note 01, 2/20/82
+                              The CCP Auto-Load Feature
+
+                         Copyright   1982 by Digital Reserch
+                CP/M is a registered trademark of Digital Research.
+                       DDT is a trademark of Digital Research.
+                                Compiled November 1982
+
+
+          Applicable products and version numbers:  CP/M   V1.4, V2.0, V2.1,
+          and V2.2
+
+          Program:  CCP (Console Command Processor)
+
+               Usually, you interact with the CP/M CCP following the sign-on
+          prompt.  With  the CCP Auto Load feature, CP/M executes an initial
+          program immediately after loading the operating system.
+
+               Under usual operation, the CCP receives control from the BIOS
+          upon  a  warm  or  cold  boot.  The  beginning  of  the CCP module
+          contains a two-element jump vector and a command line  that  takes
+          the form:
+
+
+               CCP:    JMP     CCPSTART       ;START THE CONSOLE PROCESSOR
+                       JMP     CCPCLEAR       ;CLEAR THE INITIAL COMMAND
+                       DB      127            ;MAXIMUM COMMAND LENGTH
+               CL:     DB      0              ;COMMAND LENGTH
+                       DB      '        '     ;8 BLANK CHARACTERS
+                       DB      '        '     ;       "
+                       DB      'COPYRIGHT...' ;COPYRIGHT NOTICE
+
+
+               If control is transferred to location CCP (address 3400H in a
+          20K  CP/M),  the  console processor examines the command length at
+          location CL (3407H in a 20K CP/M).  If the command length byte  is
+          zero,  then  you  receive the sign-on prompt and the CCP waits for
+          console input.  If the command length byte is not  zero,  the  CCP
+          assumes  an  initial  command  has  already been entered.  The CCP
+          executes the command on each cold  or  warm  boot  if  control  is
+          transferred  to  location CCP.  However, if control is transferred
+          to location CCP+3 (JMP CCPCLEAR), the initial command  is  cleared
+          and  the  program  enters  the  CCP  at  the  command  line level,
+          displaying the default drive prompt.
+
+               Specify the length of the initial command using a nonzero  CL
+          byte.  The  command  must be followed by a terminating zero.  CP/M
+          executes the command following that CL  byte.   Although  only  16
+          blank  spaces  are  provided,  you  can  move the Digital Research
+          copyright notice for more spaces.
+
+
+
+
+            You can initialize  the  command  line  of  the  CCP  on  the
+          operating  system  tracks  or  in the relocatable image within the
+          MOVCPM data area.  The initial command executes in distributed  or
+          reconfigured CP/M systems.
+
+               Following SYSGEN and SAVE  commands,  save  the  CP/M  memory
+          image above the cold boot loader code starting at location (980H).
+          If the system boot routines require more than 80H bytes,  the  CCP
+          code begins at location 0A00H.
+
+               Modifying MOVCPM.COM is similar to modifying  the  CCP.   The
+          difference is that the CCP always begins at location 0A00H.
+
+               The  following  procedure  uses  DDT    to  modify  the  CCP,
+          allowing  execution  of the initial command DIR after each warm or
+          cold boot.
+
+          A>movcpm * *
+
+          CONSTRUCTING 64K CP/M Vers. 2.2
+          READY FOR "SYSGEN" OR
+          "SAVE 35 CPM64.COM
+          A>save 35 cpm64.com
+
+          A>ddt cpm64.com
+          DDT VERS 2.2
+          NEXT PC
+          2400 0100
+          -d980
+          0980 C3 5C E7 C3 58 E7 7F 00 20 20 20 20 20 20 20 20 ...X...
+          0990 20 20 20 20 20 20 20 20 43 4F 50 59 52 49 47 48         COPYRIGH
+          09A0 54 20 28 43 29 20 31 39 37 39 2C 20 44 49 47 49 T (C) 1979, DIGI
+          09B0 54 41 4C 20 52 45 53 45 41 52 43 48 20 20 00 00 TAL RESEARCH  ..
+          09C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+          -s987
+          0987 00 3
+          0988 20 44
+          0989 20 49
+          098A 20 52
+          098B 20 0
+          098C 20 .
+          -d980
+          0980 C3 5C E7 C3 58 E7 7F 03 44 49 52 00 20 20 20 20 ...X...DIR.
+          0990 20 20 20 20 20 20 20 20 43 4F 50 59 52 49 47 48         COPYRIGH
+          09A0 54 20 28 43 29 20 31 39 37 39 2C 20 44 49 47 49 T (C) 1979, DIGI
+          09B0 54 41 4C 20 52 45 53 45 41 52 43 48 20 20 00 00 TAL RESEARCH  ..
+          09C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+          -g0
+          A>save 35 cpm64.com
+          A>sysgen cpm64.com
+
+
+
+          SYSGEN VER 2.0
+          DESTINATION DRIVE NAME (OR RETURN TO REBOOT)b
+          DESTINATION ON B, THEN TYPE RETURN
+          FUNCTION COMPLETE
+          DESTINATION DRIVE NAME (OR RETURN TO REBOOT)
+
+
+               Licensed  users  are  granted  the  right  to  include  these
+          modifications in CP/M software.