Upload

Digital Research

MPM OPERATING SYSTEMS/MPM I/MPM I SOURCE/03/flag.asm

@@ -0,0 +1,290 @@
+$title('MP/M 1.1 Flag Management')
+	name	flag
+	cseg
+;flag:
+;do;
+
+;/*
+;  Copyright (C) 1979, 1980
+;  Digital Research
+;  P.O. Box 579
+;  Pacific Grove, CA 93950
+;
+;  Revised:
+;    18 Jan 80  by Thomas Rolander
+;*/
+
+;/*
+;    Common Literals
+;*/
+
+;  declare enter$region literally
+;    'disable';
+
+;  exitr:
+;    procedure external;
+	extrn	exitr
+;    end exitr;
+
+;  declare exit$region literally
+;    'call exitr';
+
+;/*
+;    Proces Literals
+;*/
+
+;  declare process$header literally
+;    'structure (pl address,
+;                status byte,
+;                priority byte,
+;                stkptr address';
+;  declare bdos$save literally
+;               'disk$set$dma address,
+;                disk$slct$byte,
+;                dcnt address,
+;                searchl byte,
+;                searcha address,
+;                scratch (13) byte)';
+;  declare process$descriptor literally
+;               'process$header,
+;                name (8) byte,
+;                console byte,
+;                memseg byte,
+;                b address,
+;                threadraddress,
+;                bdos$save';
+
+;  declare rtr$status       literally '0',
+;          FlgWt$status     literally '4';
+
+;/*
+;  Data Page Externals
+;*/
+
+;  declare rlr address external;
+	extrn	rlr
+
+;  declare drl address external;
+	extrn	drl
+
+;  declare nmbflags byte external;
+	extrn	nmbflags
+
+;  declare sys$flag literally 'sysfla';
+;  declare sys$flag (1) address external;
+	extrn	sysfla
+
+;/*
+;    Proces Externals
+;*/
+
+;  declare rlrpdrbased rlr process$descriptor;
+
+;  declare dsptch$param literally 'dparam';
+;  declare dsptch$paramraddress external;
+	extrn	dparam
+
+;  declare dispatch literally 'dispat';
+;  dispatch:
+;    procedure external;
+	extrn	dispat
+;    end dispatch;
+
+;  declare insert$process literally 'inspr';
+;  insert$process:
+;    procedure (pdladr,pdadr) external;
+	extrn	inspr
+;      declare (pdladr,pdadr) address;
+;    end insert$process;
+
+;  declare pdadr address;
+
+;  declare pd based pdadr process$descriptor;
+
+
+sharedflagcode:
+	; shared flag code, wait & set
+	LDA	NMBFLAGS
+	MOV	B,A
+	MOV	A,C
+	CMP	B
+	JC	@1
+	MVI	A,0FFH
+	POP	H	; DISCARD RETURN ADR FROM SHARED
+	RET
+@1:
+;      enter$region;
+	DI
+;        if sys$flag(flagnmb) <> 0FFFEH then
+	MOV	E,C
+	MVI	D,0
+	LXI	H,SYSFLA
+	DAD	D
+	DAD	D	; HL = .sys$flag(flagnmb)
+	MOV	E,M
+	INX	H
+	MOV	D,M	; DE = sys$flag(flagnmb)
+	MVI	A,0FFH
+	CMP	D
+	RET
+
+;/*
+;  flagwait:
+;          The purpose of the flag wait procedure is to wait
+;        until a specified flag has been set before continuing
+;        execution.  If the flag is already set no waiting
+;        occurs.  If a process is already waiting for the same
+;        flag, no waiting occurs and the boolean flag under run
+;        is set true.
+
+;  Entry Conditions:
+;        C  = flag
+
+
+;  Exit Conditions:
+;        A  = return code,
+;              where   0 = success,
+;                    FFH = failure
+
+;        *** Note *** if waiting is to occur the process remains
+;                     in a critical region until dispatch
+
+;*/
+
+;  flag$wait:
+flgwt:
+	public	flgwt
+;    procedure (flagnmb) byte reentrant public;
+;      declare flagnmb byte;	; Register C
+;      declare ret byte;	; Register B
+
+;      if flagnmb >= nmbflags then return 0FFH;
+	CALL	SHAREDFLAGCODE
+;      ret = 0;
+;      enter$region;
+;        if sys$flag(flagnmb) <> 0FFFEH then
+	JNZ	@5A
+	DCR	A	; A = 0FEH
+	CMP	E
+	JZ	@2
+;        do;
+;          if sys$flag(flagnmb) <> 0FFFFH then
+	INR	A	; A = 0FFH
+	CMP	E
+	JNZ	@5A
+;          do;
+;            /* flag$under$run */
+;            ret = 0FFH;
+;	   end;
+;          else
+;          do;
+;            rlrpd.status = flgwt$status;
+	LHLD	RLR
+	INX	H
+	INX	H
+	MVI	M,4H
+;            dsptch$param = flagnmb;
+	MOV	L,C
+	MVI	H,0
+	SHLD	DPARAM
+;            call dispatch;
+	CALL	DISPAT
+;          end;
+;        end;
+	JMP	@5
+@2:
+;        else sys$flag(flagnmb) = 0FFFFH;
+	DCX	H
+	MVI	M,0FFH
+@5:
+	XRA	A
+;      exit$region;
+@5A:
+	PUSH	PSW
+	CALL	EXITR
+;      return ret;
+	POP	PSW	; A = ret
+	RET
+;    end flag$wait;
+
+;/*
+;  flagset:
+;          The purpose of the flag set procedure is to set the
+;        specified flag.  If a process is waiting for the flag
+;        to be set it is placed on the dispatcher ready list.
+;        If the flag is already set the booleanrflag over run
+;        is set true.
+
+;  Entry Conditions:
+;        C  = flag
+
+;  Exit Conditions:
+;        A  = return code,
+;              where   0 = success,
+;                    FFH = failure
+;*/
+
+;  flag$set:
+flgset:
+	public	flgset
+;     procedure (flagnmb) byte reentrant public;
+;      declare flagnmb byte;	; Register C
+;      derlare ret byte;	; Register B
+
+;      if flagnmb >= nmbflags then return 0FFH;
+	CALL	SHAREDFLAGCODE
+;      ret = 0;
+;      enter$region;
+;        pdadr = sys$flag(flagnmb);
+;        if pdadr = 0FFFFH then
+	JNZ	@9
+	CMP	E
+	JNZ	@7
+;        do;
+;          sys$flag(flagnmb) = 0FFFEH;
+	DCX	H
+	MVI	M,0FEH
+;        end;
+	JMP	@5
+@7:
+;        else
+;        do;
+;          if pdadr = 0FFFEH then
+	DCR	A
+	CMP	E
+	MVI	A,0FFH
+	JZ	@5A
+;          do;
+;            /* flag$over$run */
+;            ret = 0FFH;
+;          end;
+@9:
+;          else
+;          do;
+;            sys$flag(flagnmb) = 0FFFFH;
+	MOV	M,A
+	DCX	H
+	MOV	M,A
+;            pd.pl = drl;
+	LHLD	DRL
+	XCHG
+	MOV	M,E
+	INX	H
+	MOV	M,D
+;            drl = pdadr;
+	DCX	H
+	SHLD	DRL
+;            pd.status = rtr$status;
+	INX	H
+	INX	H
+	MVI	M,0H
+;          end;
+;        end;
+	JMP	@5
+;      exit$region;
+;      return ret;
+;    end flag$set;
+
+;end flag;
+	END
+