$TITLE ('DQ$SEEK to XQ_SEEK Interface Routine.')
$LARGE
/*************************************************************************/
/*                                                                       */
/*               D I S C L A I M E R   N O T I C E                       */
/*               -------------------   -----------                       */
/*                                                                       */
/*  This document and/or portions of the material and data furnished     */
/*  herewith, was developed under sponsorship of the U. S. Government.   */
/*  Neither the U.S. nor the U.S.D.O.E., nor the Leland Stanford Junior  */
/*  University, nor their employees, nor their respective contractors,   */
/*  subcontractors, or their employees, makes any warranty, express or   */
/*  implied, or assumes any liability or responsibility for accuracy,    */
/*  completeness or usefulness of any information, apparatus, product    */
/*  or process disclosed, or represents that its use will not infringe   */
/*  privately-owned rights.  Mention of any product, its manufacturer,   */
/*  or suppliers shall not, nor is it intended to, imply approval, dis-  */
/*  approval, or fitness for any particular use.  The U. S. and the      */
/*  University at all times retain the right to use and disseminate same */
/*  for any purpose whatsoever.  Such distribution shall be made by the  */
/*  National Energy Software Center at the Argonne National Laboratory   */
/*  and only subject to the distributee furnishing satisfactory proof    */
/*  that he has a valid license from the Intel Corporation in effect.    */
/*                                                                       */
/*************************************************************************/
 
DQ_SEEK: do;
 
XQ_SEEK: procedure (conn$p,mode$p,high$offset$p,low$offset$p,excep$p)
							external;
	declare (conn$p,mode$p,high$offset$p,low$offset$p,excep$p) pointer;
	end;
 
DQ$SEEK: procedure (conn,mode,high$offset,low$offset,excep$p) public;
        declare conn word, mode byte, (low$offset,high$offset) word,
                excep$p pointer;
        call XQ_SEEK(@conn,@mode,@high$offset,@low$offset,excep$p);
	end;
 
end DQ_SEEK;