/***************************************************************************
 *									    
 *			  R d b i n   F u n c t i o n			    
 *			  ---------------------------			    
 *									    
 *	The "_rdbin" function performs a read operation for binary files.   
 *									    
 *	Calling Sequence:						    
 *		ret = _rdbin(fp,buffer,bytes);				    
 *									    
 *	Where:								    
 *		fp	-> to the open CCB				    
 *		buffer	-> the user's buffer				    
 *		bytes	=  the number of bytes to be read		    
 *		ret	=  the number of bytes actually read		    
 *									    
 ****************************************************************************/

#include "portab.h"
#include "osif.h"
#include "osiferr.h"
#include "errno.h"

WORD _rdbin(fp,buff,bytes)			/****************************/
						/*			    */
REG	FD	*fp;				/* -> ccb for the file	    */
REG	BYTE	*buff;				/* -> buffer to receive data*/
REG	LONG	bytes;				/* =  # bytes to xfer	    */
{						/****************************/

#if CPM    /*===============================================================*/
REG	BYTE	*p;				/* Temp byte pointer	    */
LOCAL	LONG	xsector;			/* Temp sector number	    */
LOCAL	LONG	nsector;			/* Multi-sector count	    */
LOCAL	LONG	xbytes;				/* byte count temp	    */
REG	LONG	i;				/* Temp index		    */
						/****************************/
	xbytes = bytes;				/* Preserve org byte cnt    */
	xsector = fp->offset >> 7;		/* Calculate starting sector*/
						/*			    */
	if((fp->offset & (SECSIZ-1)) != 0)	/* If not on boundary,	    */
	{					/*	must buffer	    */
	  if(fp->sector != xsector)		/* Do sectors match?	    */
	  {					/*			    */
	    if((fp->flags & DIRTY) != 0)	/* Buffer dirty?	    */
	    {					/* 			    */
	      if(_blkio(fp,fp->sector,		/*			    */
		fp->buffer,1L,B_WRITE) != 1)	/* Try to write old buffer  */
			RETERR(FAILURE,EIO);	/* Can't; just quit.	    */
	      fp->flags &= ~DIRTY;		/* not dirty anymore	    */
	    }					/****************************/
	    if(_blkio(fp,xsector,fp->buffer,	/* Now read the		    */
		1L,B_READ) != 1)		/*		next sector */

	    	    RETERR(FAILURE,EIO);	/* Must be EOF		    */
	    fp->sector = xsector;		/* Mark buffer 		    */
	  }					/****************************/
	  p = &fp->buffer[(int)fp->offset&(SECSIZ-1)];/* buffer offset      */
						/*			    */
	  while(p < &(fp->buffer[SECSIZ]) &&	/* Move the bytes	    */
		bytes > 0)			/*			    */
	  {					/*			    */
		*buff++ = *p++;			/* Copy data byte	    */
		bytes--;			/* Decrement byte counter   */
		fp->offset++;			/* Increment offset	    */
	  }					/****************************/
	  if(bytes == 0)			/* Zero byte count now?	    */
	  {					/*			    */
		if(fp->offset > fp->hiwater)	/* Adjust hiwater if	    */
			fp->hiwater=fp->offset;	/*		necessary   */
		return(xbytes);			/* Yes, just return	    */
	  }					/*			    */
	  xsector++;				/* Bump sector pointer	    */
	}					/****************************/

/***************************************************************************
 * At this point, a multi-sector transfer may be accomplished.		    */

/****************************************************************************/
						/*			    */
	i = 0;					/* In case no xfer	    */
	nsector = bytes >> 7;			/* Compute number of sectors*/
	if(nsector > 0)				/* need to transfer??	    */
	   i=_blkio(fp,xsector,buff,nsector,	/* Do the		    */
		B_READ);			/* 	   transfer	    */
						/*			    */
	xsector += i;				/* Update sector counter    */
	fp->offset += i*SECSIZ;			/* Update offset	    */
	bytes  -= i*SECSIZ;			/* Update byte count	    */
	buff   += i*SECSIZ;			/* Update buffer address    */
						/*			    */
	if(fp->offset > fp->hiwater)		/* Adjust hiwater	    */
		fp->hiwater = fp->offset;	/*		  if needed */
	if (i != nsector)			/* Short read??		    */
	{					/*			    */
	  fp->flags |= ATEOF;			/* set EOF Flag		    */
	  return(xbytes - bytes);		/* Return actual read count */
	}					/****************************/
	if(bytes == 0)				/* Done?		    */
		return(xbytes);			/* 	 Yes, return	    */
						/****************************/
	if((fp->flags & DIRTY) != 0)		/* Buffer dirty?	    */
	{					/* This can be true for	    */
	      if(_blkio(fp,fp->sector,		/*  boundary conditions	    */
		fp->buffer,1L,B_WRITE) != 1)	/* Try to write old buffer  */
			RETERR(FAILURE,EIO);	/* Can't; just quit.	    */
	      fp->flags &= ~DIRTY;		/* not dirty anymore	    */
	}					/****************************/
	if(_blkio(fp,xsector,fp->buffer,1L,	/* Read into buffer	    */
		B_READ) != 1)			/*			    */
	{					/* 			    */
		fp->flags |= ATEOF;		/* End of file		    */
		return(xbytes-bytes);		/* return corrected count   */
	}					/****************************/
						/*			    */
	fp->sector = xsector;			/* Update data area	    */
	fp->offset += bytes;			/* Increment offset	    */
	p = &fp->buffer[0];			/* Start with 1st byte	    */
	while (bytes > 0)			/* Count down		    */
	{					/*		bytes	    */
		*buff++ = *p++;			/* Move a byte		    */
		bytes--;			/*	Down count	    */
	}					/****************************/
#endif     /*===============================================================*/

#if PCDOS  /*===============================================================*/
	UWORD	xbytes;				/* More byte count temps    */
						/****************************/
	xbytes = _pc_readblk(&(fp->fcb),fp->offset,buff,(WORD)bytes,1); /*   */
	if( xbytes==0 )				/* EOF or error condition   */
		fp->flags |= ATEOF;		/* Set EOF flag		    */
	fp->offset += xbytes;			/* Calculate new offset	    */
#endif     /*===============================================================*/

	if(fp->offset > fp->hiwater)		/* Fix up hiwater mark	    */
		fp->hiwater = fp->offset;	/* 			    */
	return(xbytes);				/* Read fully satisfied	    */
}						/****************************/
ead fully satisfied	    */
}						/****************************/
ead fully satisfied	    */
}						/****************************/