Files
Sepp J Morris 31738079c4 Upload
Digital Research
2020-11-06 18:50:37 +01:00

153 lines
6.4 KiB
C
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/****************************************************************************/
/* */
/* C P M . H */
/* --------- */
/* Copyright 1982 by Digital Research Inc. All rights reserved. */
/* */
/* This file contains CP/M specific definitions for the CP/M */
/* C Run Time Library. */
/* This file is intended only for inclusion with those functions */
/* dealing directly with the BDOS, as well as any function which */
/* has hardware dependent code (byte storage order, for instance). */
/* */
/* <portab.h> must be included BEFORE this file. */
/* */
/****************************************************************************/
/*
* CP/M FCB definition
*/
struct fcbtab /****************************/
{ /* */
BYTE drive; /* Disk drive field */
BYTE fname[8]; /* File name */
BYTE ftype[3]; /* File type */
BYTE extent; /* Current extent number */
BYTE s1,s2; /* "system reserved" */
BYTE reccnt; /* Record counter */
BYTE resvd[16]; /* More "system reserved" */
LONG record; /* Note -- we overlap the */
/* current record field to */
/* make this useful. */
}; /****************************/
#define SECSIZ 128 /* size of CP/M sector */
#define _MAXSXFR 1 /* max # sectors xferrable */
#define _MAXSHFT 12 /* shift right BDOS rtn val */
/* to obtain nsecs on err */
/****************************/
/****************************************************************************/
/* */
/* Channel Control Block (CCB) */
/* */
/* One CCB is allocated (statically) for each of the 16 possible open */
/* files under C (including STDIN, STDOUT, STDERR). Permanent data */
/* regarding the channel is kept here. */
/* */
/* */
/****************************************************************************/
struct ccb /************************************/
{ /* */
BYTE flags; /* Flags byte */
BYTE chan; /* Channel number being used */
LONG offset; /* File offset word (bytes) */
LONG sector; /* Sector currently in buffer */
LONG hiwater; /* High water mark */
struct fcbtab fcb; /* File FCB (may have TTY info)*/
BYTE buffer[SECSIZ]; /* Read/write buffer */
}; /************************************/
#define MAXCCBS 16 /* Maximum # CC Blocks */
extern struct ccb _fds[MAXCCBS]; /* Declare storage */
#define FD struct ccb /* FD Type definition */
/************************************/
/* Flags word bit definitions */
/************************************/
#define OPENED 0x01 /* Channel is OPEN */
#define ISTTY 0x02 /* Channel open to TTT */
#define ISLPT 0x04 /* Channel open to LPT */
#define ISREAD 0x08 /* Channel open readonly */
#define ISASCII 0x10 /* ASCII file attached */
#define ATEOF 0x20 /* End of file encountered */
#define DIRTY 0x40 /* Buffer needs writing */
#define ISSPTTY 0x80 /* Special tty info */
/************************************/
#define READ 0 /* Read mode parameter for open */
#define WRITE 1 /* Write mode */
/* CCB manipulation macros *************************************/
#define _getccb(i) (&_fds[i]) /* Get CCB addr */
/* Error handling *************************************/
EXTERN WORD errno; /* error place for assigning */
EXTERN WORD __cpmrv; /* the last BDOS return value */
EXTERN WORD _errcpm; /* place to save __cpmrv */
#define RETERR(val,err) {errno=(err);_errcpm=__cpmrv;return(val);}
/************************************/
/****************************************************************************/
/* */
/* B D O S F u n c t i o n D e f i n i t i o n s */
/* ------------------------------------------------- */
/* */
/* Following are BDOS function definitions used by the C runtime */
/* library. */
/* */
/****************************************************************************/
/****************************/
#define EXIT 0 /* Exit to BDOS */
#define CONOUT 2 /* Direct console output */
#define LSTOUT 5 /* Direct list device output*/
#define CONIO 6 /* Direct console I/O */
#define CONBUF 10 /* Read console buffer */
#define OPEN 15 /* OPEN a disk file */
#define CLOSE 16 /* Close a disk file */
#define DELETE 19 /* Delete a disk file */
#define CREATE 22 /* Create a disk file */
#define SETDMA 26 /* Set DMA address */
#define B_READ 33 /* Read Random record */
#define B_WRITE 34 /* Write Random record */
#define FILSIZ 35 /* Compute File Size */
#define SETMSC 44 /* Set Multi-Sector Count */
/****************************/
/****************************************************************************/
/* Other CP/M definitions */
/****************************************************************************/
#define TERM "CON:" /* Console file name */
#define LIST "LST:" /* List device file name */
#define EOFCHAR 0x1a /* End of file character-^Z */
/****************************/
/****************************************************************************/
/* Hardware dependencies */
/****************************************************************************/
#define HILO /* used when bytes stored */
/* Hi,Lo */
/****************************/
#ifdef HILO /* Hi/Lo storage used in */
struct { /* 68K */
BYTE lbhihi; /* Use this for accessing */
BYTE lbhilo; /* ordered bytes in 32 bit*/
BYTE lblohi; /* LONG qtys. */
BYTE lblolo; /* */
}; /* */
struct { /* Use this for accessing */
WORD lwhi; /* ordered words in 32 bit*/
WORD lwlo; /* LONG qtys. */
}; /* */
#else /****************************/
struct { /* Lo/Hi storage use on */
BYTE lblolo; /* PDP-11, VAX, 8086,... */
BYTE lblohi; /* */
BYTE lbhilo; /* */
BYTE lbhihi; /* */
}; /* */
struct { /* */
WORD lwlo; /* */
WORD lwhi; /* */
}; /* */
#endif /****************************/
/*************************** end of cpm.h ***********************************/