RuntimeInformation.OSArchitecture doesn't exist in PowerShell 5.1
(which Azure Run Command uses), so IsARM64 was always false. This
caused ALL ARM64-specific code paths to be skipped.
[build images]
- machine.mjs: use C:\Scoop\apps\nodejs\current\node.exe instead of
bare 'node' which isn't in Azure Run Command PATH
- azure.mjs: spawnSafeFn now throws on non-zero exit code so bootstrap
failures actually stop the build instead of capturing broken images
[build images]
Child process scoop installs break PATH/shims. Only use child process
for 7zip on ARM64 (post_install error). Everything else runs in-process.
nssm falls back to blob storage mirror when nssm.cc is down.
[build images]
- VS installer exit code 3010 (reboot required) is not a real error
- mingw command is gcc, not mingw
- Use powershell -Command for scoop install isolation
[build images]
Scoop's 7zip post_install throws a terminating error on ARM64 that
propagates regardless of ErrorActionPreference. Running scoop in a
child PowerShell process isolates the error completely.
[build images]
7zip is a Scoop dependency of git. On ARM64 SYSTEM, 7zip's post_install
fails trying to delete 7zr.exe from TEMP. Fix by:
1. Moving Install-7zip before Install-Git so it's already installed
2. Using SilentlyContinue in Install-Scoop-Package then verifying
[build images]
The Remove-Item error in Scoop's 7zip post_install is a terminating
error that propagates through try/catch. Use SilentlyContinue to
suppress it, then verify 7z is actually installed.
[build images]
- 7zip: tolerate post_install cleanup error (access denied on TEMP)
- Rust: set CARGO_HOME/RUSTUP_HOME before rustup-init to avoid
SYSTEM profile path issue (Move-Item failure)
- nssm: fall back to blob storage mirror when nssm.cc returns 503
## Problem
The bundler's number renamer was mangling `.name` properties on crypto
class prototype methods and constructors:
- `hash.update.name` → `"update2"` instead of `"update"`
- `verify.verify.name` → `"verify2"` instead of `"verify"`
- `cipher.update.name` → `"update3"` instead of `"update"`
- `crypto.Hash.name` → `"Hash2"` instead of `"Hash"`
### Root causes
1. **Named function expressions on prototypes** collided with other
bindings after scope flattening (e.g. `Verify.prototype.verify =
function verify(...)` collided with the imported `verify`)
2. **Block-scoped constructor declarations** (`Hash`, `Hmac`) got
renamed when the bundler hoisted them out of block scope
3. **Shared function declarations** in the Cipher/Decipher block all got
numeric suffixes (`update3`, `final2`, `setAutoPadding2`, etc.)
## Fix
- Use `Object.assign` with object literals for prototype methods —
object literal property keys correctly infer `.name` and aren't subject
to the renamer
- Remove unnecessary block scopes around `Hash` and `Hmac` constructors
so they stay at module level and don't get renamed
- Inline `Cipheriv` methods and copy references to `Decipheriv`
## Tests
Added comprehensive `.name` tests for all crypto classes: Hash, Hmac,
Sign, Verify, Cipheriv, Decipheriv, DiffieHellman, ECDH, plus factory
functions and constructor names.
## What does this PR do?
Fixes the write loop in `StandaloneModuleGraph.inject()` for POSIX
targets (the `else` branch handling ELF/Linux standalone binaries) to
pass `remain` instead of `bytes` to `Syscall.write()`.
## Problem
The write loop that appends the bundled module graph to the end of the
executable uses a standard partial-write retry pattern, but passes the
full `bytes` buffer on every iteration instead of the remaining portion:
```zig
var remain = bytes;
while (remain.len > 0) {
switch (Syscall.write(cloned_executable_fd, bytes)) { // bug: should be 'remain'
.result => |written| remain = remain[written..],
...
}
}
```
If a partial write occurs, the next iteration re-writes from the start
of the buffer instead of continuing where it left off, corrupting the
output binary. The analogous read loop elsewhere in the same file
already correctly uses `remain`.
## Fix
One-character change: `bytes` → `remain` in the `Syscall.write()` call.
## How did you verify your code works?
- `bun bd` compiles successfully
- `bun bd test test/bundler/bun-build-compile.test.ts` — 4/4 pass
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Bot <claude-bot@bun.sh>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Alistair Smith <alistair@anthropic.com>
## What does this PR do?
Fixes `bun build --compile` producing an all-zeros binary when the
output directory is on a different filesystem than the temp directory.
This is common in Docker containers, Gitea runners, and other
environments using overlayfs.
## Problem
When `inject()` finishes writing the modified executable to the temp
file, the file descriptor's offset is at EOF. If the subsequent
`renameat()` to the output path fails with `EXDEV` (cross-device — the
temp file and output dir are on different filesystems), the code falls
back to `copyFileZSlowWithHandle()`, which:
1. Calls `fallocate()` to pre-allocate the output file to the correct
size (filled with zeros)
2. Calls `bun.copyFile(in_handle, out_handle)` — but `in_handle`'s
offset is at EOF
3. `copy_file_range` / `sendfile` / `read` all use the current file
offset (EOF), read 0 bytes, and return immediately
4. Result: output file is the correct size but entirely zeros
This explains user reports of `bun build --compile
--target=bun-darwin-arm64` producing invalid binaries that `file`
identifies as "data" rather than a Mach-O executable.
## Fix
Seek the input fd to offset 0 in `copyFileZSlowWithHandle` before
calling `bun.copyFile`.
## How did you verify your code works?
- `bun bd` compiles successfully
- `bun bd test test/bundler/bun-build-compile.test.ts` — 6/6 pass
- Added tests that verify compiled binaries have valid executable
headers and produce correct output
- Manually verified cross-compilation: `bun build --compile
--target=bun-darwin-arm64` produces a valid Mach-O binary
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Bot <claude-bot@bun.sh>
Co-authored-by: Claude <noreply@anthropic.com>
## Summary
- Update inline error snapshots in valkey reliability tests to match
Redis 8's changed error message format
- Redis 8 (`redis:8-alpine` in our test Docker container) no longer
appends `, with args beginning with: ` when an unknown command has no
arguments
## Root cause
Redis commit
[`25f780b6`](25f780b662)
([PR #14690](https://github.com/redis/redis/pull/14690)) changed
`commandCheckExistence()` in `src/server.c` to only append `, with args
beginning with: ` when there are actual arguments (`c->argc >= 2`).
Previously it was always appended, producing a dangling `, with args
beginning with: ` even with zero arguments.
## Changes
- `test/js/valkey/reliability/protocol-handling.test.ts`: Updated
`SYNTAX-ERROR` snapshot (no args case)
- `test/js/valkey/reliability/error-handling.test.ts`: Updated
`undefined` and `123` snapshots (no args cases)
## Test plan
- [ ] Verify `protocol-handling.test.ts` passes in CI (was failing on
every attempt as shown in #26869 / build #36831)
- [ ] Verify `error-handling.test.ts` passes in CI
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-authored-by: Claude Bot <claude-bot@bun.sh>
Co-authored-by: Claude <noreply@anthropic.com>
#### (Copies commits from #26447)
## Summary
- Add a global `--retry <N>` flag to `bun test` that sets a default
retry count for all tests (overridable by per-test `{ retry: N }`). Also
configurable via `[test] retry = N` in bunfig.toml.
- When a test passes after one or more retries, the JUnit XML reporter
emits a separate `<testcase>` entry for each failed attempt (with
`<failure>`), followed by the final passing `<testcase>`. This gives
flaky test detection tools per-attempt timing and result data using
standard JUnit XML that all CI systems can parse.
## Test plan
- `bun bd test test/js/junit-reporter/junit.test.js` — verifies separate
`<testcase>` entries appear in JUnit XML for tests that pass after retry
- `bun bd test test/cli/test/retry-flag.test.ts` — verifies the
`--retry` CLI flag applies a default retry count to all tests
## Changelog
<!-- CHANGELOG:START -->
- Added `--retry <N>` flag to `bun test` to set a default retry count
for all tests
- Added `[test] retry` option to bunfig.toml
- JUnit XML reporter now emits separate `<testcase>` entries for each
retry attempt, providing CI visibility into flaky tests
<!-- CHANGELOG:END -->
---------
Co-authored-by: Chris Lloyd <chrislloyd@anthropic.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
## Summary
Fixes "Unknown HMR script" error during rapid consecutive edits in HMR
## Test plan
- [x] Basic consecutive HMR edits work correctly
---------
Co-authored-by: Alistair Smith <alistair@anthropic.com>
